From lhorrocks-barlow at ocf.co.uk Mon May 11 17:28:17 2026 From: lhorrocks-barlow at ocf.co.uk (Laurence Horrocks-Barlow) Date: Mon, 11 May 2026 16:28:17 +0000 Subject: [gpfsug-discuss] Final Reminder: Storage Scale User Group 2026 Registration Message-ID: Hi all, Just a final reminder that there is now around one week remaining before the Storage Scale User Group 2026 events. New User Day: https://www.eventbrite.co.uk/e/storage-scale-new-user-day-tickets-1984335442726 Main Conference: https://www.eventbrite.co.uk/e/storage-scale-user-group-2026-tickets-1984907862850 We've seen a strong level of interest again this year, so if you're planning to attend and haven't yet registered, now is a good time to do so. We're also still open to any last-minute speaker submissions, lightning talks, or discussion topics from the community. Looking forward to seeing many of you there. Thanks, Lauz Laurence Horrocks-Barlow|Technical Director Phone:+44 (0)1142 572200 Address:OCF Limited, Unit 5 Rotunda Business Centre, ​Thorncliffe Park, Chapeltown, S35 2PG, UK Website:www.ocf.co.uk FOR NEW / EXISTING SUPPORT OR MANAGED SERVICES TICKETS GO TO: HELPDESK.OCF.CO.UK OCF Limited is a company registered in England and Wales. ​Registered number 4132533 | VAT number GB 780 6803 14. ​Registered office address: OCF Limited, 5 Rotunda Business Centre, Thorncliffe Park, Chapeltown, S35 2PG. This message is private and confidential. ​If you have received this message in error, please notify us immediately and remove it from your system. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image803245.png Type: image/png Size: 611 bytes Desc: image803245.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image249863.png Type: image/png Size: 642 bytes Desc: image249863.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image451816.png Type: image/png Size: 12422 bytes Desc: image451816.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image885796.png Type: image/png Size: 130926 bytes Desc: image885796.png URL: From jonathan.buzzard at strath.ac.uk Mon May 11 17:55:14 2026 From: jonathan.buzzard at strath.ac.uk (Jonathan Buzzard) Date: Mon, 11 May 2026 17:55:14 +0100 Subject: [gpfsug-discuss] Building kernel module on RHEL10 Message-ID: <67f42397-0ac8-4200-95d0-ec0dab26126b@strath.ac.uk> Just an FYI so you don't bash your head against a brick wall like I did. The mmbuildgpl script assumes that which is installed and as they say assumptions are the mother of all screw ups. Turns out on RHEL10 when you do a minimal install, which is not part of the minimal install and it's not a dependency of any of the GPFS RPMs. The outcome of which is you get cryptic messages about various stuff being installed but not in the expected location. That's because the script tests for say the make RPM and then uses which to test its location but as which is not installed the test fails. Two options; either the GPFS RPMs should have the which package as a dependency or mmbuildgpl script should test that it is installed and warn if it is not. JAB. -- Jonathan A. Buzzard Tel: +44141-5483420 HPC System Administrator, ARCHIE-WeSt. University of Strathclyde, John Anderson Building, Glasgow. G4 0NG From lhorrocks-barlow at ocf.co.uk Tue May 12 20:26:49 2026 From: lhorrocks-barlow at ocf.co.uk (Laurence Horrocks-Barlow) Date: Tue, 12 May 2026 19:26:49 +0000 Subject: [gpfsug-discuss] [EXTERNAL] - Building kernel module on RHEL10 In-Reply-To: <67f42397-0ac8-4200-95d0-ec0dab26126b@strath.ac.uk> References: <67f42397-0ac8-4200-95d0-ec0dab26126b@strath.ac.uk> Message-ID: Good spot, I agree it should be pulled as a dependency. Have you raised this as a support call or RFI? Laurence Horrocks-Barlow | Technical Director [https://ocf.co.uk/media/1njni4oz/ocf.png] Phone: 0114 257 2200 Address: OCF Limited, Unit 5 Rotunda Business Centre, Thorncliffe Park, Chapeltown, Sheffield S35 2PG Website: http://www.ocf.co.uk/ [LinkedIn icon] [Twitter icon] [https://ocf.co.uk/media/ezzcb21y/banner.jpg] OCF Limited is a company registered in England and Wales. Registered number 4132533, VAT number GB 780 6803 14. Registered office address: OCF Limited, 5 Rotunda Business Centre, Thorncliffe Park, Chapeltown, Sheffield, S35 2PG. This message is private and confidential. If you have received this message in error, please notify us immediately and remove it from your system. Laurence Horrocks-Barlow|Technical Director Phone:+44 (0)114 257 2200 Address:OCF Limited, Unit 5 Rotunda Business Centre, ​Thorncliffe Park, Chapeltown, S35 2PG FOR NEW / EXISTING SUPPORT OR MANAGED SERVICES TICKETS GO TO: HELPDESK.OCF.CO.UK ________________________________ From: gpfsug-discuss on behalf of Jonathan Buzzard via gpfsug-discuss Sent: Monday, May 11, 2026 5:55:14 PM To: gpfsug-discuss at gpfsug.org Cc: Jonathan Buzzard Subject: [EXTERNAL] - [gpfsug-discuss] Building kernel module on RHEL10 Just an FYI so you don't bash your head against a brick wall like I did. The mmbuildgpl script assumes that which is installed and as they say assumptions are the mother of all screw ups. Turns out on RHEL10 when you do a minimal install, which is not part of the minimal install and it's not a dependency of any of the GPFS RPMs. The outcome of which is you get cryptic messages about various stuff being installed but not in the expected location. That's because the script tests for say the make RPM and then uses which to test its location but as which is not installed the test fails. Two options; either the GPFS RPMs should have the which package as a dependency or mmbuildgpl script should test that it is installed and warn if it is not. JAB. -- Jonathan A. Buzzard Tel: +44141-5483420 HPC System Administrator, ARCHIE-WeSt. University of Strathclyde, John Anderson Building, Glasgow. G4 0NG _______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at gpfsug.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss_gpfsug.org -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image337948.png Type: image/png Size: 12422 bytes Desc: image337948.png URL: From committee at io500.org Wed May 13 05:21:45 2026 From: committee at io500.org (IO500 Committee) Date: Tue, 12 May 2026 22:21:45 -0600 Subject: [gpfsug-discuss] CFS IO500 ISC'26 Deadline 12 June 2026 Message-ID: https://io500.org/submission Deadline 12 June 2026 AoE The IO500 is now accepting and encouraging submissions for the upcoming semi-annual IO500 Production and Research lists, in conjunction with ISC HPC 26. Once again, we are also accepting submissions to the 10 Client Node Challenge to encourage the submission of small scale results. View the requirements for submitting to each list on the IO500 Submissions Webpage. The new ranked lists will be announced at the "IO500: High Performance Storage Community" BoF. We hope to see many new results. The GitHub repository has a new tag io500-isc26 for the current version of the benchmark for this list. Background Following the success of the Top500 in collecting and analyzing historical trends in supercomputer technology and evolution, the IO500 was created in 2017, published its first list at SC17, and has grown continually since then. The benchmarks represent community-accepted standards, including being used in Request for Proposals for new HPC platforms. The benchmarks showcase the IO access pattern extremes, giving a full picture of storage system potential performance. The list is about much more than just the raw rank; all submissions help the community by collecting and publishing a wider corpus of data. The multi-fold goals of the benchmark suite are as follows: - Represent naive and optimized access patterns for the execution of a rich variety of HPC applications, their achievable performance, and the documentation of how the numbers are achieved. - Support small to extreme-scale Research and Production HPC systems using flexible storage APIs - Maximizing simplicity in running the benchmark suite - Specifically, the benchmark suite includes a hero run of both IOR and mdtest, configured however possible to maximize performance and establish an upper-bound for performance. It also includes an IOR and mdtest run with highly prescribed parameters in an attempt to determine a lower performance bound. New in this release is a random 4KB read phase to better understand the performance of non-sequential IO patterns used in AI workloads. Finally, it includes a namespace search, as this has been determined to be a highly sought-after feature in HPC storage systems that has historically not been well-measured. Supported storage APIs are those that are part of IOR and mdtest. Extending these tools with a public pull request can be done to enable new storage APIs. - The goals of the community are also multi-fold: - Gather historical data for the sake of analysis and to aid predictions of storage futures - Collect tuning information to share valuable performance optimizations across the community - Encourage vendors and designers to optimize for workloads beyond "hero runs" - Establish bounded expectations for users, procurers, and administrators - Understand and be able to reproduce performance on storage systems - Using the IO500 Reproducibility guidelines, each submission is labeled according to the breadth of details provided and the access to the deployed storage software that enables the community to reproduce the results and study system design changes over time. - The IO500 follows a two-stage approach. First, there will be a two-week stabilization period during which we encourage the community to verify that the benchmark runs properly on a variety of storage systems. During this period, the benchmark may be updated based upon feedback from the community. The final benchmark will then be released. We expect that runs compliant with the rules made during the stabilization period will be valid as a final submission unless a significant defect is found. 10 Client Node I/O Challenge The 10 Client Node Challenge is conducted using the regular IO500 benchmark, however, with the rule that exactly 10 client nodes must be used to run the benchmark. You may use any shared storage with any number of servers. We will announce the results in the Production and Research lists as well as in separate derived lists. Birds-of-a-Feather Once again, we encourage you to submit to join our community, and to attend the ISC26 BoF on ISC26, where we will announce the new IO500 Production and Research lists and their 10 client node counterparts. Be Part of the Community Submissions of all sizes are welcome; the webpage features customizable sorting, allowing you to submit on a small system and still achieve a very good per-client score, for example. We will also highlight new and interesting results at the BoF. From jonathan.buzzard at strath.ac.uk Wed May 13 13:02:44 2026 From: jonathan.buzzard at strath.ac.uk (Jonathan Buzzard) Date: Wed, 13 May 2026 13:02:44 +0100 Subject: [gpfsug-discuss] [EXTERNAL] - Building kernel module on RHEL10 In-Reply-To: References: <67f42397-0ac8-4200-95d0-ec0dab26126b@strath.ac.uk> Message-ID: <25ef9322-cac6-4893-a57f-1acb03c7d044@strath.ac.uk> On 12/05/2026 20:26, Laurence Horrocks-Barlow wrote: > > Good spot, I agree it should be pulled as a dependency. > > Have you raised this as a support call or RFI? > Nope, to busy (not that it is making much progress) trying to sort out why the DSS-G 5.2.3a installation bombs out on my brand new DSS-G claiming issues with the firmware for the 450W-16e HBA's which are most definitely present and correct, as is the firmware file in the Confluent install which works because it upgrade our existing DSS-G back in March :-( JAB. -- Jonathan A. Buzzard Tel: +44141-5483420 HPC System Administrator, ARCHIE-WeSt. University of Strathclyde, John Anderson Building, Glasgow. G4 0NG From ncalimet at lenovo.com Wed May 13 13:34:43 2026 From: ncalimet at lenovo.com (Nicolas CALIMET) Date: Wed, 13 May 2026 12:34:43 +0000 Subject: [gpfsug-discuss] [EXTERNAL] - Building kernel module on RHEL10 In-Reply-To: <25ef9322-cac6-4893-a57f-1acb03c7d044@strath.ac.uk> References: <67f42397-0ac8-4200-95d0-ec0dab26126b@strath.ac.uk> <25ef9322-cac6-4893-a57f-1acb03c7d044@strath.ac.uk> Message-ID: /Removing all mailing list Hi Jonathan, Can you please confirm this is an issue when running dssg-install that complains it cannot find your HBAs? BTW I guess you meant DSS-G 5.3a which is the latest release in the field. Thanks -- Nicolas Calimet, PhD | HPC System Architect | Lenovo ISG | https://www.lenovo.com/dssg -----Original Message----- From: gpfsug-discuss On Behalf Of Jonathan Buzzard via gpfsug-discuss Sent: Wednesday, May 13, 2026 14:03 To: gpfsug main discussion list Cc: Jonathan Buzzard Subject: Re: [gpfsug-discuss] [EXTERNAL] - Building kernel module on RHEL10 On 12/05/2026 20:26, Laurence Horrocks-Barlow wrote: > > Good spot, I agree it should be pulled as a dependency. > > Have you raised this as a support call or RFI? > Nope, to busy (not that it is making much progress) trying to sort out why the DSS-G 5.2.3a installation bombs out on my brand new DSS-G claiming issues with the firmware for the 450W-16e HBA's which are most definitely present and correct, as is the firmware file in the Confluent install which works because it upgrade our existing DSS-G back in March :-( JAB. -- Jonathan A. Buzzard Tel: +44141-5483420 HPC System Administrator, ARCHIE-WeSt. University of Strathclyde, John Anderson Building, Glasgow. G4 0NG _______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at gpfsug.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss_gpfsug.org From cdmaestas at us.ibm.com Thu May 21 17:27:37 2026 From: cdmaestas at us.ibm.com (CHRIS MAESTAS) Date: Thu, 21 May 2026 16:27:37 +0000 Subject: [gpfsug-discuss] IBM Storage Scale User Group registration links throughout the year Message-ID: Hello everyone, I have been placing the registration links for the user groups at ibm.biz/ibmscaleug for events throughout the year. Currently, we have the Italy, ISC user group links and US San Jose Silicon Valley Labs (SVL) links live. * Milan - IBM Storage Scale User Group Event, May 25 Milan, Italy * Hamburg ISC - IBM Storage Scale User Group Event, June 23rd * San Jose - 2026 West Coast IBM Data and AI Scale Storage New User Seminar * San Jose - 2026 West Coast IBM Storage Scale User Group Event -ChiefTroublemakingOfficer -------------- next part -------------- An HTML attachment was scrubbed... URL: From christof.schmitt at us.ibm.com Thu May 21 17:50:07 2026 From: christof.schmitt at us.ibm.com (Christof Schmitt) Date: Thu, 21 May 2026 16:50:07 +0000 Subject: [gpfsug-discuss] Building kernel module on RHEL10 In-Reply-To: <67f42397-0ac8-4200-95d0-ec0dab26126b@strath.ac.uk> References: <67f42397-0ac8-4200-95d0-ec0dab26126b@strath.ac.uk> Message-ID: <7e643e8818332745ff877545a1d64fea59606141.camel@us.ibm.com> On Mon, 2026-05-11 at 17:55 +0100, Jonathan Buzzard via gpfsug-discuss wrote: > Just an FYI so you don't bash your head against a brick wall like I > did. > The mmbuildgpl script assumes that which is installed and as they say > assumptions are the mother of all screw ups. > > Turns out on RHEL10 when you do a minimal install, which is not part > of > the minimal install and it's not a dependency of any of the GPFS > RPMs. > > The outcome of which is you get cryptic messages about various stuff > being installed but not in the expected location. That's because the > script tests for say the make RPM and then uses which to test its > location but as which is not installed the test fails. > > Two options; either the GPFS RPMs should have the which package as a > dependency or mmbuildgpl script should test that it is installed and > warn if it is not. We will add the missing dependency on which in an upcoming PTF. Regards, Christof From bbanister at jumptrading.com Fri May 22 11:11:46 2026 From: bbanister at jumptrading.com (Bryan Banister) Date: Fri, 22 May 2026 10:11:46 +0000 Subject: [gpfsug-discuss] IBM Storage Scale User Group registration links throughout the year In-Reply-To: References: Message-ID: Hey Chris! Not yet seeing the latest presentations on the spetrumscale.org site yet: https://www.spectrumscaleug.org/presentations/ Would be great to review them again, thanks! -Bryan From: gpfsug-discuss On Behalf Of CHRIS MAESTAS via gpfsug-discuss Sent: Thursday, May 21, 2026 11:28 AM To: gpfsug main discussion list Cc: CHRIS MAESTAS Subject: [gpfsug-discuss] IBM Storage Scale User Group registration links throughout the year This message has originated from an EXTERNAL SENDER Hello everyone, I have been placing the registration links for the user groups at ibm.biz/ibmscaleug for events throughout the year. Currently, we have the Italy, ISC user group links and US San Jose Silicon Valley Labs (SVL) links live. * Milan - IBM Storage Scale User Group Event, May 25 Milan, Italy * Hamburg ISC - IBM Storage Scale User Group Event, June 23rd * San Jose - 2026 West Coast IBM Data and AI Scale Storage New User Seminar * San Jose - 2026 West Coast IBM Storage Scale User Group Event -ChiefTroublemakingOfficer ________________________________ Note: This email is for the confidential use of the named addressee(s) only and may contain proprietary, confidential, or privileged information and/or personal data. If you are not the intended recipient, you are hereby notified that any review, dissemination, or copying of this email is strictly prohibited, and requested to notify the sender immediately and destroy this email and any attachments. Email transmission cannot be guaranteed to be secure or error-free. The Company, therefore, does not make any guarantees as to the completeness or accuracy of this email or any attachments. This email is for informational purposes only and does not constitute a recommendation, offer, request, or solicitation of any kind to buy, sell, subscribe, redeem, or perform any type of transaction of a financial product. Personal data, as defined by applicable data protection and privacy laws, contained in this email may be processed by the Company, and any of its affiliated or related companies, for legal, compliance, and/or business-related purposes. You may have rights regarding your personal data; for information on exercising these rights or the Company's treatment of personal data, please email datarequests at jumptrading.com. -------------- next part -------------- An HTML attachment was scrubbed... URL: From lhorrocks-barlow at ocf.co.uk Fri May 22 16:10:59 2026 From: lhorrocks-barlow at ocf.co.uk (Laurence Horrocks-Barlow) Date: Fri, 22 May 2026 15:10:59 +0000 Subject: [gpfsug-discuss] Storage Scale UG community moving from Slack to Discord Message-ID: Hi all, We are in the process of migrating the Storage Scale UG community from Slack to Discord. The primary reasons for the move are Slack's increasingly restrictive free-tier limitations, particularly around message history retention and the requirement to periodically renew invite links. The new Discord server is now available here: https://gpfsug.org/discord We encourage everyone to join as soon as convenient. Existing discussion channels are being recreated there and future community activity will gradually transition across. We also now have the "NSDaemon" bot available on the Discord server to help with GPFS / IBM Storage Scale and related questions. Over time, we will also be looking at integrating the Discord forum and related community content into the main website. The Slack workspace will remain available for a short period during the migration, but we expect to retire it in the near future. If you have any issues joining, please reply to the mailing list. Thanks, Spectrum Scale UG Laurence Horrocks-Barlow|Technical Director Phone:+44 (0)1142 572200 Address:OCF Limited, Unit 5 Rotunda Business Centre, ​Thorncliffe Park, Chapeltown, S35 2PG, UK Website:www.ocf.co.uk FOR NEW / EXISTING SUPPORT OR MANAGED SERVICES TICKETS GO TO: HELPDESK.OCF.CO.UK OCF Limited is a company registered in England and Wales. ​Registered number 4132533 | VAT number GB 780 6803 14. ​Registered office address: OCF Limited, 5 Rotunda Business Centre, Thorncliffe Park, Chapeltown, S35 2PG. This message is private and confidential. ​If you have received this message in error, please notify us immediately and remove it from your system. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image667393.png Type: image/png Size: 611 bytes Desc: image667393.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image027404.png Type: image/png Size: 642 bytes Desc: image027404.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image163595.png Type: image/png Size: 12422 bytes Desc: image163595.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image699842.png Type: image/png Size: 130926 bytes Desc: image699842.png URL: From lhorrocks-barlow at ocf.co.uk Fri May 22 16:13:21 2026 From: lhorrocks-barlow at ocf.co.uk (Laurence Horrocks-Barlow) Date: Fri, 22 May 2026 15:13:21 +0000 Subject: [gpfsug-discuss] [EXTERNAL] - Re: IBM Storage Scale User Group registration links throughout the year In-Reply-To: References: Message-ID: Hi Byran, We'll look at getting the presentations rounded up and added to the website asap; we just need to provide people time to redact/tidy slides up. -- Lauz Laurence Horrocks-Barlow|Technical Director Phone:+44 (0)1142 572200 Address:OCF Limited, Unit 5 Rotunda Business Centre, ​Thorncliffe Park, Chapeltown, S35 2PG, UK Website:www.ocf.co.uk FOR NEW / EXISTING SUPPORT OR MANAGED SERVICES TICKETS GO TO: HELPDESK.OCF.CO.UK OCF Limited is a company registered in England and Wales. ​Registered number 4132533 | VAT number GB 780 6803 14. ​Registered office address: OCF Limited, 5 Rotunda Business Centre, Thorncliffe Park, Chapeltown, S35 2PG. This message is private and confidential. ​If you have received this message in error, please notify us immediately and remove it from your system. From: gpfsug-discuss On Behalf Of Bryan Banister via gpfsug-discuss Sent: 22 May 2026 11:12 To: gpfsug main discussion list Cc: Bryan Banister Subject: [EXTERNAL] - Re: [gpfsug-discuss] IBM Storage Scale User Group registration links throughout the year Hey Chris! Not yet seeing the latest presentations on the spetrumscale.org site yet: https://www.spectrumscaleug.org/presentations/ Would be great to review them again, thanks! -Bryan From: gpfsug-discuss > On Behalf Of CHRIS MAESTAS via gpfsug-discuss Sent: Thursday, May 21, 2026 11:28 AM To: gpfsug main discussion list > Cc: CHRIS MAESTAS > Subject: [gpfsug-discuss] IBM Storage Scale User Group registration links throughout the year This message has originated from an EXTERNAL SENDER Hello everyone, I have been placing the registration links for the user groups at ibm.biz/ibmscaleug for events throughout the year. Currently, we have the Italy, ISC user group links and US San Jose Silicon Valley Labs (SVL) links live. * Milan - IBM Storage Scale User Group Event, May 25 Milan, Italy * Hamburg ISC - IBM Storage Scale User Group Event, June 23rd * San Jose - 2026 West Coast IBM Data and AI Scale Storage New User Seminar * San Jose - 2026 West Coast IBM Storage Scale User Group Event -ChiefTroublemakingOfficer ________________________________ Note: This email is for the confidential use of the named addressee(s) only and may contain proprietary, confidential, or privileged information and/or personal data. If you are not the intended recipient, you are hereby notified that any review, dissemination, or copying of this email is strictly prohibited, and requested to notify the sender immediately and destroy this email and any attachments. Email transmission cannot be guaranteed to be secure or error-free. The Company, therefore, does not make any guarantees as to the completeness or accuracy of this email or any attachments. This email is for informational purposes only and does not constitute a recommendation, offer, request, or solicitation of any kind to buy, sell, subscribe, redeem, or perform any type of transaction of a financial product. Personal data, as defined by applicable data protection and privacy laws, contained in this email may be processed by the Company, and any of its affiliated or related companies, for legal, compliance, and/or business-related purposes. You may have rights regarding your personal data; for information on exercising these rights or the Company's treatment of personal data, please email datarequests at jumptrading.com. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image062994.png Type: image/png Size: 611 bytes Desc: image062994.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image957511.png Type: image/png Size: 642 bytes Desc: image957511.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image706773.png Type: image/png Size: 12422 bytes Desc: image706773.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image642959.png Type: image/png Size: 130926 bytes Desc: image642959.png URL: From lhorrocks-barlow at ocf.co.uk Fri May 22 16:30:46 2026 From: lhorrocks-barlow at ocf.co.uk (Laurence Horrocks-Barlow) Date: Fri, 22 May 2026 15:30:46 +0000 Subject: [gpfsug-discuss] [EXTERNAL] - IBM Storage Scale User Group registration links throughout the year In-Reply-To: References: Message-ID: https://www.spectrumscaleug.org/eventslist/list/ Laurence Horrocks-Barlow|Technical Director Phone:+44 (0)1142 572200 Address:OCF Limited, Unit 5 Rotunda Business Centre, ​Thorncliffe Park, Chapeltown, S35 2PG, UK Website:www.ocf.co.uk FOR NEW / EXISTING SUPPORT OR MANAGED SERVICES TICKETS GO TO: HELPDESK.OCF.CO.UK OCF Limited is a company registered in England and Wales. ​Registered number 4132533 | VAT number GB 780 6803 14. ​Registered office address: OCF Limited, 5 Rotunda Business Centre, Thorncliffe Park, Chapeltown, S35 2PG. This message is private and confidential. ​If you have received this message in error, please notify us immediately and remove it from your system. From: gpfsug-discuss On Behalf Of CHRIS MAESTAS via gpfsug-discuss Sent: 21 May 2026 17:28 To: gpfsug main discussion list Cc: CHRIS MAESTAS Subject: [EXTERNAL] - [gpfsug-discuss] IBM Storage Scale User Group registration links throughout the year Hello everyone, I have been placing the registration links for the user groups at ibm.biz/ibmscaleug for events throughout the year. Currently, we have the Italy, ISC user group links and US San Jose Silicon Valley Labs (SVL) links live. * Milan - IBM Storage Scale User Group Event, May 25 Milan, Italy * Hamburg ISC - IBM Storage Scale User Group Event, June 23rd * San Jose - 2026 West Coast IBM Data and AI Scale Storage New User Seminar * San Jose - 2026 West Coast IBM Storage Scale User Group Event -ChiefTroublemakingOfficer -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image104867.png Type: image/png Size: 611 bytes Desc: image104867.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image847041.png Type: image/png Size: 642 bytes Desc: image847041.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image251085.png Type: image/png Size: 12422 bytes Desc: image251085.png URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image246569.png Type: image/png Size: 130926 bytes Desc: image246569.png URL: From seg at us.ibm.com Thu May 28 14:32:46 2026 From: seg at us.ibm.com (Scott Garfinkle) Date: Thu, 28 May 2026 13:32:46 +0000 Subject: [gpfsug-discuss] Building kernel module on RHEL10 In-Reply-To: <67f42397-0ac8-4200-95d0-ec0dab26126b@strath.ac.uk> References: <67f42397-0ac8-4200-95d0-ec0dab26126b@strath.ac.uk> Message-ID: >The mmbuildgpl script assumes that which is installed Which which? That which! Which that which? That which which is installed. -scott garfinkle ________________________________ From: gpfsug-discuss on behalf of Jonathan Buzzard via gpfsug-discuss Sent: Monday, May 11, 2026 11:55 AM To: gpfsug-discuss at gpfsug.org Cc: Jonathan Buzzard Subject: [EXTERNAL] [gpfsug-discuss] Building kernel module on RHEL10 Just an FYI so you don't bash your head against a brick wall like I did. The mmbuildgpl script assumes that which is installed and as they say assumptions are the mother of all screw ups. Turns out on RHEL10 when you do a minimal install, which is not part of the minimal install and it's not a dependency of any of the GPFS RPMs. The outcome of which is you get cryptic messages about various stuff being installed but not in the expected location. That's because the script tests for say the make RPM and then uses which to test its location but as which is not installed the test fails. Two options; either the GPFS RPMs should have the which package as a dependency or mmbuildgpl script should test that it is installed and warn if it is not. JAB. -- Jonathan A. Buzzard Tel: +44141-5483420 HPC System Administrator, ARCHIE-WeSt. University of Strathclyde, John Anderson Building, Glasgow. G4 0NG _______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at gpfsug.org https://urldefense.proofpoint.com/v2/url?u=http-3A__gpfsug.org_mailman_listinfo_gpfsug-2Ddiscuss-5Fgpfsug.org&d=DwIGaQ&c=BSDicqBQBDjDI9RkVyTcHQ&r=BPjJ9aBH61OHyvjqrUxwAg&m=aZsbnDsoMJcLHsnWey_y1VhjhvwFVauNS-xMUgPxCTyemTqvBjL8lMNO9l-mesli&s=-bitnJBR0KMaLj0Xn7xTqkgNoQ9Oi7AkFJOAgA7rs-w&e= -------------- next part -------------- An HTML attachment was scrubbed... URL: