[gpfsug-discuss] [External] DSS-G sharing IPMI network
Nicolas CALIMET
ncalimet at lenovo.com
Thu Jun 25 08:18:36 BST 2026
Confluent has the hardwaremanagement.port node attribute:
https://hpc.lenovo.com/users/documentation/confluentosdeploy.html
DSS-G is agnostic toward shared/dedicated here.
--
Nicolas Calimet, PhD | HPC System Architect | Lenovo ISG | https://www.lenovo.com/dssg
-----Original Message-----
From: Jonathan Buzzard <jonathan.buzzard at strath.ac.uk>
Sent: Wednesday, June 24, 2026 12:26
To: Nicolas CALIMET <ncalimet at lenovo.com>; gpfsug-discuss at spectrumscale.org
Subject: Re: [External] [gpfsug-discuss] DSS-G sharing IPMI network
On 19/06/2026 18:23, Nicolas CALIMET wrote:
>
> Hi,
>
> The recommendation is likely originating from environments where
> switch ports and cabling may be too constrained if using the
> dedicated LOM/OCP port. There is also a correlation with setting up
> the Confluent environment.
>
I just don't get what that correlation might be. Noting I having setup
the servers with dedicated connections for the XCC using confluent
without issue. I guess that is my fault for presuming that because they
came configured in dedicated mode that is what I should be using.
Are we an outlier having a dedicated management network? I would have
thought that was the norm/best practice?
> So to answer your question - I'm assuming you're dealing with a V3
> server (SR655 V3), which indeed may have the dedicated port enabled
> by default:
>
> $ nodeconfig dss45 -c IMM.SharedNicMode dss45: IMM.SharedNicMode:
> Dedicated (Default: Dedicated)
>
> $ nodeconfig dss45 IMM.SharedNicMode=jnk dss45: jnk is not a valid
> value for IMM.SharedNicMode
> (Shared:nic0,Shared,Dedicated,Shared:nic3,Shared:nic4,Shared:nic5,Shared:nic6,Shared:nic7,Shared:nic8)
>
>
> So if you want to stick to the recommendation, "nodeconfig <nodes>
> IMM.SharedNicMode=Shared" should be what you're looking for if you
> pick up the correct physical OCP port as documented.
>
Is there a support issue with just staying with the dedicated NIC for
the XCC connection?
I was about to start the migration off our old DSS-G but if I need to
rejig this then now is the time.
JAB.
-- Jonathan A. Buzzard Tel: +44141-5483420
HPC System Administrator, ARCHIE-WeSt.
University of Strathclyde, John Anderson Building, Glasgow. G4 0NG
More information about the gpfsug-discuss
mailing list